KTM 1290 Super Duke R Carbon Fiber Parts Complete Motorcycle Accessories

Tabela e Përmbajtjes

KTM 1290 Super Duke R Carbon Fiber Parts

What Are These Parts?

Ne bëjmë pjesë të fibrave të karbonit për KTM 1290 Super Duka R. These parts make your bike look cool and go fast. Our parts are dritë dhe të fortë. They fit on your bike just right.

We have many parts for Super Duke R dhe Super Duke GT bikes. Each part helps your bike in a big way. Motoçikletë me fibër karboni parts are the best way to make your bike better.

Why Pick Our Parts?

Tona pjesë të fibrave të karbonit do many good things for your bike:

  • Bëni biçikletën tuaj më të lehta
  • Help air go over your bike better
  • Keep parts safe from dirt and rocks
  • Bëni biçikletën tuaj të duket i ftohtë
  • Zgjat një kohë të gjatë

And the best part? Fibër karboni does not rust! Want to know more? Read about does carbon fiber rust on our site.

Pjesë që Ne bëjmë

Ne bëjmë shumë pjesë të fibrave të karbonit për tuajin KTM 1290 Super Duka R. Here are the main ones:

1. Front Fender (Integral)

This is a big front fender. It is made of 100% fibër karboni. It fits on:

  • 2014–2019 Super Duke R
  • 2017–2024 Super Duke GT

It costs $253.00. It helps your bike cut through the air. It looks way better than the plastic one that came on your bike.

2. Front Fender (Front Part)

This is just the front part of the fender. It is also 100% fibër karboni. It fits on:

  • 2020+ Super Duke R
  • 2025+ Super Duke GT
  • 2024+ Duke 990

Ju mund të zgjidhni me shkëlqim ose mat finish. You can also pick i thjeshtë ose twill thurje.

3. Sprocket Cover

This part keeps your chain and gears clean. It is made of fibër karboni. It fits on 2014–2023 Super Duke R bikes. It costs 25% off the old price.

This part keeps dirt and rocks away from your chain. It also makes your bike lighter.

4. Side Panels

These make the sides of your bike look great. They are made of fibër karboni with stuff that blocks sun damage. They fit on 2019–2024 Super Duke GT bikes.

Side panels are great for when you ride every day. They make your bike look much cooler.

5. Tail Fairing

This part goes on the back of your bike. It is made of fibër karboni. It fits on 2022–2023 Super Duke R bikes.

The tail fairing helps air flow over your bike better when you go fast. It also makes your bike look more mean.

6. Upper Side Cowl Panels

These go on the middle part of your bike. They are made of 100% fibër karboni. They fit on 2014–2023 Super Duke R bikes. We have good prices for these.

These parts are great for bikes that go to shows or races. They fit just like the parts that came on your bike.

7. Rear Hugger

This keeps mud and dirt from going all over your bike. It is made of fibër karboni. It fits on 2022–2023 Super Duke R bikes.

The rear hugger is great for when you ride in rain or mud. It keeps your bike clean.

8. OEM Replacement Parts

We make parts just like the ones that came on your bike. But ours are fibër karboni. They fit on 2020–2025 Super Duke R and GT bikes. Prices change based on which part you want.

These parts are good if you want to make your bike better but keep it the same shape.

Opsionet e përfundimit

You can pick how you want your fibër karboni to look:

  1. Me shkëlqim – shiny and sleek
  2. Mat – not shiny, more stealth look
  3. Endje e thjeshtë – looks like a simple grid pattern
  4. Twill Weave – looks like a zigzag pattern

You can mix these to get just what you want. Some people like endje e thjeshtë me shkëlqim for a classic look. Others like matte twill weave for a more race look.

Want to know about other finish options? Check out our page on mund të lyeni pluhur fibër karboni.

Bike Fit Guide

Here’s which bikes our parts fit on:

Modeli i biçikletësviteParts We Have
Super Duke R2014-2019Front Fender, Sprocket Cover, Side Panels, Upper Side Cowl
Super Duke R2020-2023Front Fender, Sprocket Cover, Tail Fairing, Rear Hugger
Super Duke GT2017-2024Front Fender, Side Panels
Super Duke GT2025+Front Fender (Front Part)
Duke 9902024+Front Fender (Front Part)

Not sure what fits your bike? Just ask us. We know all about KTM bikes.

When To Use These Parts

Tona pjesë të fibrave të karbonit are good for many things:

For Track Days

  • Front Fender (Integral)
  • Tail Fairing
  • Panelet anësore

These parts help your bike go fast on the track. They are light and help air flow over your bike.

For Street Riding

  • Mbulesa me dhëmbëza
  • Front Fender (Front Part)
  • Pjesë këmbimi OEM

These parts make your bike look cool on the street. They also help keep your bike clean.

For All Weather

  • Përqafimi i pasmë
  • Parafango e përparme
  • Panelet anësore

These parts keep dirt and water off your bike when it’s wet or muddy.

For Shows

  • All parts with Glossy Finish
  • Upper Side Cowl Panels
  • Tail Fairing

These parts make your bike look wow at shows. People will stop to look.

Pse fibra karboni?

Fibër karboni is the best stuff for bike parts. Here’s why:

  1. është shumë e lehtë – lighter than metal or plastic
  2. është shumë i fortë – stronger than metal or plastic
  3. Duket shumë i ftohtë – the weave pattern is one-of-a-kind
  4. It does not rust or break down in the sun
  5. It does not get hot like metal does

Tona fibër karboni me porosi parts use the best carbon fiber we can find. We make sure each part is perfect.

Si i bëjmë pjesët tona

Ne bëjmë tonën pjesë të fibrave të karbonit me kujdes:

  1. We start with sheets of carbon fiber
  2. We put the sheets in molds shaped like the parts
  3. We add special glue that makes it hard
  4. We put it in a hot place to make it set
  5. We take it out and make it smooth
  6. We add the finish you pick – glossy or matte

Each part is checked by hand to make sure it’s right. We only sell parts that pass our tests.

What Our Riders Say

Riders who use our pjesë të fibrave të karbonit on their KTM 1290 Super Duka R say good things:

“My bike lost 5 pounds with these parts. I can feel the difference when I ride fast.” – Tom

“The glossy finish looks so good in the sun. Everyone asks where I got my parts.” – Sarah

“The rear hugger keeps my bike clean even when roads are wet. Best add-on I’ve bought.” – Mike

“These parts fit just like the ones from KTM but look way better and are lighter too.” – Alex

Not Just For KTM

Ne bëjmë pjesë të fibrave të karbonit for many bikes and cars. If you have a car, check out our makinë me fibër karboni edhe pjesët.

Ne madje mund të bëjmë pjesë me porosi if you have a special need. Just ask us.

Si të porosisni

To get pjesë të fibrave të karbonit për tuajin KTM 1290 Super Duka R:

  1. Pick the parts you want from this page
  2. Choose your finish – glossy or matte
  3. Choose your weave – plain or twill
  4. Shto në shportë
  5. Check out and pay
  6. Wait for your cool new parts!

We ship fast to get your parts to you quick.

Care Tips

Mbajeni tuajën pjesë të fibrave të karbonit looking good:

  • Clean with soft cloth and mild soap
  • Don’t use hard brushes or rough sponges
  • Use wax made for carbon fiber to keep shine
  • Check bolts now and then to make sure parts are on tight
  • Keep away from very hot things like exhaust pipes

With good care, your parts will look great for years.

Ready To Transform Your Super Duke?

Tona pjesë të fibrave të karbonit will make your KTM 1290 Super Duka R ose Super Duke GT:

  • Më të lehta for better speed and handling
  • Më të fortë to last a long time
  • Cooler looking to stand out from other bikes

Don’t wait! Get the best pjesë të fibrave të karbonit for your KTM today. Your bike will thank you.

Kontrollues i temperaturës së mykut me presion të nxehtë me fibër karboni

Procesi i formimit të materialit të përbërë me fibër karboni me presion të nxehtë

Fabrika jonë përdor një proces të avancuar të shtypjes së nxehtë me fibër karboni me një kallëp çeliku P20, duke siguruar efikasitet të lartë, saktësi, qëndrueshmëri dhe kosto-efektivitet për prodhim cilësor.

Autoklavë me fibër karboni

Fabrika jonë përdor mbi 100 autoklava me presion të nxehtë, duke përdorur kallëpe alumini dhe induksion vakum për të formuar fibrat e karbonit me saktësi. Nxehtësia dhe presioni i lartë rrisin forcën, qëndrueshmërinë dhe cilësinë e përsosur.

Autoklava me fibër karboni
Qendra kërkimore e teknologjisë së inxhinierisë së fibrave të karbonit

Qendra Kërkimore e Teknologjisë së Inxhinierisë së Fibrave të Karbonit

Qendra jonë e Kërkimit të Fibrave të Karbonit drejton inovacionin në energjinë e re, inteligjencën dhe dizajnin e lehtë, duke përdorur kompozita të avancuara dhe Krauss Maffei Fiber Form për të krijuar zgjidhje moderne, të përqendruara te klientët.

Pyetje e bërë më shpesh

Këtu janë përgjigjet për pyetjet e bëra shpesh nga fabrika me përvojë e produkteve të fibrave të karbonit

Ne prodhojmë një gamë të gjerë përbërësish me fibra karboni, duke përfshirë pjesë automobilash, pjesë motorçikletash, komponentë të hapësirës ajrore, aksesorë detarë, pajisje sportive dhe aplikime industriale.

Ne përdorim kryesisht fibër karboni parapreg me cilësi të lartë dhe përbërje të përforcuara me performancë të lartë të përforcuar me fibra karboni me tërheqje të madhe për të siguruar karakteristika të forcës, qëndrueshmërisë dhe peshës së lehtë.

Po, produktet tona janë të veshura me përfundime mbrojtëse ndaj UV për të siguruar qëndrueshmëri afatgjatë dhe për të ruajtur pamjen e tyre të lëmuar.

Po, pajisjet dhe pajisjet tona janë të afta të prodhojnë përbërës të fibrave të karbonit me përmasa të mëdha duke ruajtur saktësinë dhe cilësinë.

Cilat janë përfitimet e përdorimit të produkteve me fibra karboni?
Fibra karboni ofron një raport të jashtëzakonshëm forcë-peshë, rezistencë ndaj korrozionit, ngurtësi, stabilitet termik dhe një pamje të hijshme dhe moderne.

Ne kujdesemi për sektorët e automobilave, motoçikletave, hapësirës ajrore, detare, mjekësore, sportive dhe industriale me fokus në komponentët e fibrave të karbonit me peshë të lehtë dhe me performancë të lartë.

Po, ne ofrojmë zgjidhje të personalizuara të fibrave të karbonit të përshtatura për specifikimet tuaja, duke përfshirë dizajne, madhësi dhe modele unike.

Ne përdorim teknologji të avancuara të tilla si formimi në autoklavë, shtypja e nxehtë dhe ambalazhimi me vakum, duke siguruar saktësi, stabilitet dhe cilësi në çdo produkt. mrekullitë me temën Hello Elementor, ne po përpiqemi të sigurohemi që ajo të funksionojë mirë edhe me të gjitha temat kryesore.

Ne përdorim kallëpe alumini dhe çeliku P20, të dizajnuara për qëndrueshmëri dhe saktësi të lartë, për të krijuar komponentë komplekse dhe precize të fibrave të karbonit.

Produktet tona i nënshtrohen kontrolleve rigoroze të kontrollit të cilësisë, duke përfshirë saktësinë e dimensioneve, integritetin e materialit dhe testimin e performancës, për të përmbushur standardet e industrisë.

Produkte të ngjashme

Lëvizni në krye