Can You Powder Coat Carbon Fiber? The Best Guide

Table of Contents

The Big Problem with Coating Carbon Fiber

Do you have carbon fiber parts that need a nice coat? Many shops say “no” when you ask to powder coat carbon fiber. Why? The heat can break your parts!

This is bad news for car parts, bikes, and other cool things made with carbon fiber.

What happens?

  • Parts get cracks
  • The shine goes away
  • Parts get weak
  • Your money is wasted

Why This Makes You Feel Stuck

You want your carbon fiber parts to look nice and stay strong. But now you feel stuck with these problems:

  1. You paid a lot for carbon fiber
  2. It does not match your other parts
  3. You cannot find a shop to help
  4. You worry about ruining your parts

The more you look, the more you find shops that say “we don’t do that.” It makes you feel like there is no way to get what you want.

The Good News: We Can Help!

As a carbon fiber products manufacturer with 28+ years of making these parts, we know how to solve this big problem!

“We make custom carbon fiber parts with the right coating that looks good and stays strong.”

How We Fix This Problem:

Our Low-Heat UV Method Works!

We use a special way to coat carbon fiber that does not break it. This is how we do it:

  1. We clean the parts the right way
  2. We add a special layer that helps the powder stick
  3. We use UV-curable powder that works at low heat
  4. We test every part to make sure it is strong

The Facts About Powder Coating Carbon Fiber

Look at this table to see what works and what does not:

What We KnowThe Facts
Normal powder coatingToo hot! Will melt the resin at 150°C
Success rate with UV methodOver 85% with our tools
Cost for bike frames$150-$300 per part
Safe heat levelMust stay under 120°C
Coating life8+ years (more than paint)
Colors you can pick300+ colors to choose from

Why Most Shops Fail With Carbon Fiber

Most shops ruin carbon fiber because:

  • They use too much heat that melts the resin
  • They don’t know how to make the powder stick to carbon
  • They try to sand the surface which breaks the fibers
  • They use the wrong kind of powder

In one test, 60% of frames broke with old methods, but less than 15% broke with our UV method.

Our Step-by-Step Method That Works

1. Check Your Part

We look at your carbon fiber part to see if it can be coated. Not all parts can be coated.

2. Clean It Right

We clean the part with no sand blasting. This keeps the fibers safe.

3. Add Our Special Primer

We add a thin layer that helps the powder stick. This makes the coat stick better.

4. Apply The UV Powder

We use a special powder that works at low heat. This is the key to not breaking your part!

5. Quick UV Cure

We cure the powder in just 3-5 minutes, not the 20-40 minutes that would break your part.

6. Test For Strength

We check each part to make sure it is still strong.

Why Our Customers Love Our Method

Our custom carbon fiber work makes people happy because:

  • It looks great – The finish is smooth and shiny
  • It lasts long – 70% more scratch proof than paint
  • It stays strong – No cracks or breaks
  • It costs less in the long run – No need to redo it next year

The Types Of Carbon Fiber We Can Coat

We can coat all these types of carbon fiber:

Real Cases Where Our Method Worked

Case 1: Race Car Parts

A race team came to us with forged carbon fiber Lamborghini auto parts that needed to match their car. Other shops said no.

We coated their parts with our UV method. Now their car looks great and the parts are still strong after two race seasons!

Case 2: Bike Frame Rescue

A bike shop sent us 10 frames that were ruined by bad coating. We fixed 8 of them with our method. The other 2 were too far gone.

The bike shop now sends all their carbon fiber work to us!

Case 3: Custom Parts

A boat maker needed custom carbon fiber dash parts that matched their look. We made the parts and coated them to match. They looked so good they ordered 50 more sets!

Why Choose Our OEM/ODM Services

As a carbon fiber products manufacturer in China with 28+ years of work, we offer:

  1. Full service – We make and coat the parts
  2. Custom work – Made just for you
  3. Low cost – Better prices than US or EU shops
  4. Big or small jobs – From one part to 10,000
  5. On time – We ship when we say we will

What You Need To Know Before Coating Carbon Fiber

If you want to coat your own carbon fiber, know these things:

Good Things About Powder Coating Carbon Fiber:

  • It looks very nice
  • It lasts a long time
  • It can match other parts
  • It adds some scratch protection

Bad Things To Watch For:

  • Too much heat will break it
  • It costs more up front
  • You need special tools
  • Not all shops know how to do it right

The Best Types Of Powder For Carbon Fiber

Not all powder works on carbon fiber. Here are the best kinds:

  1. UV-curable powder – Best but costs more
  2. Low-temp polyester – Good but not as tough
  3. Special mix powder – We make our own mix

Stay away from:

  • High-temp epoxy powder
  • Thick coat powder
  • Old style powders

How To Tell If Your Shop Can Do This Right

Ask these things:

  • “What heat do you use?” (Must be under 120°C)
  • “How do you make it stick?” (Should use a primer)
  • “How long have you done carbon fiber?” (Look for real cases)
  • “Can I see a test piece first?” (Always test!)

How We Make Your Parts From Start To End

Our work flow is simple:

  1. You tell us what you need
  2. We make a plan and price
  3. You say “yes” and we start
  4. We make your carbon fiber parts
  5. We coat them with our special method
  6. We test them to make sure they work
  7. We ship them to you fast
  8. You love how they look and work!

Common Questions About Powder Coating Carbon Fiber

Can all carbon fiber be powder coated?

No. Some parts are too thin or not made to take any heat. We check each part first.

Will the coating make my part heavier?

The coat adds less than 1% to the weight. Your part will still be light!

How much does it cost?

Most bike parts cost $150-$300 to coat. Car parts can be $300-$800 based on size.

How long does it take?

Most jobs take 5-7 days plus ship time.

Can I get any color?

We have 300+ colors to pick from.

Ready To Get Your Carbon Fiber Coated Right?

Do you have carbon fiber parts that need coating? Or do you need us to make custom carbon fiber parts for you?

We can help! As your OEM/ODM carbon fiber products manufacturer, we make the process easy.

Call or email us today to get:

  • A fast price quote
  • Help with your design
  • Samples of our work
  • A time plan for your job

Don’t risk your nice carbon fiber with shops that don’t know what they do! Trust our 28+ years of making these parts.

Visit our website or call us now at +86-136 2619 1009

Comment

Blog Form

Contact

Explore the world of carbon fiber—how it’s made, where it’s used, and why it’s so strong yet lightweight. Stay updated on the latest trends and innovations

Scroll al inicio

Get Our Offer

Fill out the form below, and we will be in touch shortly.