We manufacture custom carbon fiber wallets, card holders, and money clips for brands, distributors, gift companies, and product developers sourcing factory-direct from China. Our work covers the full production chain — from carbon fiber plate production and CNC machining, to surface coating, laser engraving, hardware assembly, and final packaging.
This page is intended for B2B buyers who need custom carbon fiber wallets for resale, private label, corporate gifts, or product development. If you need only one personal wallet, custom tooling and OEM production may not be cost-effective.
If you’re looking for a CFRP factory with real composite manufacturing experience — not a trading company or general accessories supplier — you can learn more about our background and production capabilities on our factory overview page.
A rigid carbon fiber shell holding 2–8 cards. Typically produced from 3K twill carbon fiber plate, CNC-cut to final dimensions, with edge chamfering, sanding, and clear coat finish. One of the most straightforward structures for volume production and private label customization.
A two-panel design with card slots and an optional cash compartment. Carbon fiber panels are bonded with a flexible spine or hinge element. Can be combined with a leather interior lining for a mixed-material aesthetic.
Uses chopped carbon fiber compression-molded into a solid shell. The surface has a distinctive marbled pattern with no continuous weave — each piece looks different. Forged carbon suits curved geometry, thicker walls, and designs where a premium visual texture is part of the product identity. See the process comparison section below for when forged carbon makes sense versus flat plate.
Carbon fiber body with a metal spring clip, typically stainless steel or titanium. Holds cash and 2–4 cards. The clip can be integrated into the laminate or externally attached depending on the structural design and target weight.
Carbon fiber outer shell with full-grain or top-grain leather interior panels. The main production challenges are adhesive selection, surface preparation before bonding, and consistent edge finishing where carbon and leather meet. Common for premium lifestyle brand projects.
Any of the above structures can incorporate an RFID-blocking layer integrated into the laminate during production. This is a layup decision, not an accessory — see the dedicated RFID section below.
A card holder or bifold with an internal pocket or recess designed to hold an AirTag or similar tracker. The recess can be machined into a carbon fiber plate or molded directly into a compression-molded shell, depending on the required geometry.
A mechanical card-ejection wallet with an aluminum body and carbon fiber cover plate. The aluminum frame carries the spring or lever mechanism; the carbon fiber provides the outer visual surface. This is more of a metal fabrication and carbon fiber assembly project than a pure CFRP part — assembly tolerances and hardware sourcing are as important as the carbon fiber production itself.
Vævemønstre:
Overfladefinish:
Material combinations:
Surface finish must be confirmed before production begins — it affects the layup schedule, coating process, and post-processing steps.
The table below summarizes the main parameters we can customize for OEM and private label carbon fiber wallet projects.
| Vare | Tilgængelige muligheder |
|---|---|
| Wallet type | Card holder, money clip, bifold, AirTag wallet, pop-up wallet |
| Materiale | 3K twill carbon, plain weave carbon, forged carbon, carbon + aluminum, carbon + leather |
| Færdiggør | Gloss, matte, semi-gloss, raw sealed carbon |
| Card capacity | 2–8 cards for slim holders; custom capacity available by design |
| Logo | Lasergravering, CNC-fælg med harpiksefyld, metal logo plade, læderprägning |
| RFID | Valgfrit lag af aluminiumfolie eller netbeskyttelse integreret under lagdannelse |
| Emballage | Simpel kasse, gaveæske, magnetlukningskasse, hvidmærket detailpakke |
| Referencefil | Foto, skitse, 2D-tegning eller STEP/STP-fil accepteres |
Ikke alle pungestrukturer passer til den samme produktionsmetode. Tabellen nedenfor skitserer, hvilken proces vi anbefaler efter pungetype, sammen med værktøjskrav og praktisk pasform.
| Pungestruktur | Anbefalet Proces | Værktøjskrav | Bedste Pasform |
|---|---|---|---|
| Flad kulfiber kortholder | Kulfiberplade + CNC skæring | Lav | Små serier, enkel privat label |
| Kulfiber pengeclip pung | CNC-kulfiberplade + metalclip samling | Lav til middel | Brandlogo, gave marked |
| Forged carbon pung skal | Kompressionsstøbning | Middel til høj | Premium design, buede eller tykke vægge |
| Kulfiber + aluminium pop-up pung | CNC-aluminium krop + kulfiber dækkeplade | Medium | RFID pung, mekanisk kortudkast |
| Kulfiber + læder bifold | Kulfiberplade + læderbinding og kantbehandling | Lav til middel | Premium livsstilsbrands |
| AirTag kulfiber pung | CNC-maskineret lomme eller formet fælger | Medium | Ny produktudvikling |
Flad kulfiberplade + CNC skæring er den laveste indgangsbarriere. Pladen produceres i standarddimensioner, hvorefter den skæres CNC til dine pungdimensioner med kortslots og eventuelle yderligere funktioner maskinelagt ind. Denne tilgang fungerer godt til simple kortholdere og pengeclips, især til første serier eller mærker, der tester markedet, inden de forpligter sig til 3D-værktøj.
Kompressionsformet forgivet kulfiber kræver en form, hvilket tilføjer upfront værktøjsomkostning. Fordelen er designfrihed - buede overflader, integrerede fælger, tykkere strukturelle vægge, og den forgivet kulfiber visuelt tekstur, som flade plader ikke kan replikerer. For premium placering eller AirTag lommer, er dette normalt den rigtige proces.
Kulfiber + aluminium pop-up punge er lige så meget et metal samlingsprojekt som et kulfiberprojekt. Aluminiumrammen bærer den mekaniske funktion; kulfiber er overfladematerialet. Disse projekter kræver strammere samlingstolerancer og koordinering mellem kulfiber og metalproduktionsfaser.
Den samme kompositproduktionskompetence, vi anvender til tilpassede kulfiberdele på tværs af automotive og industrielle sektorer anvendes direkte til pungværktøjer, lagdannelsesplanlægning og overfladekvalitetskontrol.
For pungestrukturer, der kræver en form - kompressionsformede forgivet kulfiber skilte, bifold hængsler og enhver 3D-geometri, der ikke kan skæres CNC fra flade plader - er værktøjsmateriale en vigtig projektbeslutning. Det påvirker opfrontomkostninger, formliv, overfladekvalitet og langsigtet produktionskonsistens.
| Værktøjsmateriale | Typisk formliv | Egnet projekt | Noter |
|---|---|---|---|
| FRP / glasfiber form | 20–50 stk | Prototype, lavvolumen validering | Lavere upfront omkostninger; overfladekvalitet og dimensionsstabilitet begrænset over gentagne cykler |
| Epoxy værktøjsplade | 100–300 stk | Lille til mellemstort batchproduktion | Bedre dimensionsstabilitet end FRP; velegnet til designs, der bliver forfinet før forpligtelse til aluminium |
| Aluminium form | 500–1,000+ pcs | Long-term OEM / ODM production | Higher upfront cost; consistent surface quality across repeat orders; recommended for any project intended for ongoing batch production |
| Steel mold | 1,000+ pcs | High-volume hardware or compression parts | Typically used for metal or injection molding components; not always required for carbon fiber wallet shells |
Actual mold life depends on part geometry, curing temperature, demolding frequency, surface finish specification, and whether the mold is used for flat plate forming or 3D compression molding. These figures are working estimates — we will advise on the appropriate tooling for your specific design at the RFQ stage.
For a completely new wallet structure, mold cost is the main upfront investment. If your project is a small personal order or a one-time run with no expectation of repeat production, custom mold development may not be cost-effective. We will tell you this directly at the quote stage rather than after tooling has begun.
The production method drives the cost structure. Understanding the difference helps you make the right decision for your project scale and target price point.
Fordele: Low tooling cost, faster first sample, easy to modify dimensions, suitable for small batch validation.
Limitations: Design is constrained to flat or near-flat geometry. Edge profiles are limited by CNC toolpath. Surface appearance is a continuous woven pattern — no 3D shell structure.
Bedst til: Simple card holders, money clips, flat-panel bifolds, brands testing a new SKU before investing in mold tooling.
Fordele: Full 3D shell geometry, curved surfaces, integrated recesses (for AirTag, RFID layer, logo recess), distinctive marbled visual surface that flat plate cannot replicate.
Limitations: Requires a mold. Small batch unit costs are higher due to tooling amortization. Sample modifications require mold adjustment, which adds cost and time versus flat plate.
Bedst til: Premium lifestyle products, curved wallet shells, designs where visual differentiation is part of the brand positioning.
Fordele: Enables mechanical card-ejection function, strong structural frame, well-suited for RFID-blocking designs with full metal enclosure.
Limitations: More complex supply chain — aluminum CNC, carbon fiber plate, spring or lever mechanism, and final assembly. Assembly tolerances are tighter than a pure carbon fiber part. Not a pure CFRP product.
Bedst til: RFID-blocking wallets with mechanical ejection, MagSafe wallets with carbon fiber cover, premium EDC products with functional hardware.
For reference, here is the production sequence for a typical carbon fiber wallet project:
For RFID models, the shielding layer is integrated at Step 1 before curing. This same layup-first approach is consistent with how we handle functional integration in kulfiberdele til biler where structural and surface decisions must be made before the laminate is cured.
RFID blocking in a carbon fiber wallet is a laminate construction decision, not a coating or insert that can be added after the part is finished.
Carbon fiber is electrically conductive, which gives it some shielding properties — but we do not rely on the carbon fiber laminate alone as the RFID-blocking solution. For consistent and verifiable blocking performance, we integrate an aluminum foil or aluminum mesh layer within the laminate stack during the layup process. This layer is bonded between carbon fiber plies before curing, so it becomes part of the finished part structure.
Several construction factors affect shielding performance:
RFID-blokering skal specificeres i designfasen, inden værktøjet endelig besluttes. Det kan ikke eftermonteres i en færdigdel. Hvis din produktspecifikation kræver RFID-blokering, anbefaler vi at bekræfte skjoldpræstationen på det godkendte prøveprodukt ved hjælp af en standard kontaktløs korttest, især for åbne eller pop-up pungstrukturer, hvor geometrien påvirker skjolddækningen.
Det standard frekvensområde for kontaktløse betalingskort og adgangskort er 13,56 MHz. Hvis dit produkt sigter mod en specifik blokstandard eller frekvensområde, bekræft dette i dit brief, så vi kan designe laminatet derefter.
Logoets placering og metode skal bekræftes på det godkendte prøvemateriale, før batchproduktionen begynder. Dette er især vigtigt for lasergravering, hvor dybde, placering og graverspeed kalibreres til den specifikke klarlak og carbonfiberoverflade på det godkendte prøvemateriale.
Hver batch gennemgår inspektion før pakning. For nye designs producerer vi prøvematerialer til din godkendelse, før masseproduktionen starter.
Standard inspektionspunkter pr. enhed:
| Problem | Årsag | Kontrolmetode |
|---|---|---|
| Kant delaminering | Utilstrækkelig forsegling efter CNC-skæring | Fodershastighedskontrol, slibeseqvens, påføring af kantforsegler |
| Skærende eller ufærdige kanter | CNC-skæring uden affasningstrin | Efter-CNC affasning og manuel kantfinish |
| Ujævn glans eller appelsinskal i klarlak | Belægningsinstabilitet, fugtighed, temperatur | Kontrolleret spraymiljø, testpanel før batch, polering om nødvendigt |
| Afvigelse i logoets position | Ingen fastgørelse under lasergravering | Graverej mod positionen af godkendt prøve |
| Kortslot for stramt eller for løs | Slotdimension ikke kontrolleret til prøvespecifikation | Dimensionelt tjek og korttilpasningstest ved QC-stadiet |
| Forged carbonoverflade hulrum | Dårlig harpiksfordeling eller kompressionstryk | Formtryk kontrol, visuel og taktil inspektion af hærdede dele |
| Læderbinding fejlet | Wrong adhesive or insufficient surface preparation | Surface sanding, adhesive selection by substrate, peel test on sample |
| Scratched surface in packaging | Insufficient individual protection | Individual wrapping with soft film, box interior inspection before sealing |
| Inconsistent matte finish across batch | Clear coat variation between spray sessions | Same coating batch and spray settings per production run; test panel at start of each session |
Not every wallet project justifies mold investment. Here is how we typically assess it:
Tooling makes sense when:
Tooling may not make sense when:
If your project is in an early stage and you are not sure whether tooling is necessary, send us the design and we will advise on the lowest-cost production approach that meets your specification.
To prepare an accurate quote, share as much of the following as you can:
You do not need a 3D file to begin. A photo of a reference product with target dimensions is enough for an initial feasibility review. We will follow up if we need additional detail before quoting.
The shell is genuine carbon fiber composite — woven carbon fabric cured with epoxy resin, or forged carbon (chopped fiber, compression molded). We do not use vinyl wraps, hydro-dipped plastic, or carbon-look printed surfaces. You can verify any sample we send with a conductivity test at the cut edge.
Yes. Laser engraving onto the carbon fiber surface is the standard method. We can also CNC-machine a recessed logo filled with colored resin, or bond a metal logo plate to the surface. The right approach depends on your logo geometry and finish preference — we will advise once we see the artwork.
Yes. We produce without any factory branding. Your logo is the only branding on the product. Packaging can also be customized fully to your brand identity.
MOQ depends on the structure and whether new tooling is required. Flat-plate CNC designs have a lower barrier to entry. For new mold development, we will assess what quantity makes the tooling cost commercially viable for your project and be straightforward about that in the quote.
Yes. We produce pre-production samples for your review and approval before any batch order begins. The sample lets you verify dimensions, surface finish, logo, and function before sign-off.
We integrate an aluminum foil or mesh layer into the carbon fiber laminate during production. Carbon fiber alone is not a sufficient or consistent RFID shield. The shielding layer must be specified before tooling is finalized — it cannot be added after production. We recommend testing RFID performance on the approved sample, especially for open-sided card holder designs.
Flat carbon fiber plate is CNC-cut to wallet dimensions — lower tooling cost, faster first sample, good for simple card holders and money clips. Forged carbon is compression-molded from chopped fiber, which allows 3D geometry, curved surfaces, and integrated recesses that flat plate cannot produce. Forged carbon also has a distinctive marble-pattern surface rather than a woven weave. Forged carbon requires a mold; flat plate does not.
Yes. If you already have a reference wallet, prototype, or competitor product, we can review the structure and suggest a more practical carbon fiber production method. This may include switching from compression molding to flat plate CNC, adjusting edge radius, modifying the RFID layer specification, or simplifying the logo method to reduce cost without affecting appearance.
Yes. For some customers, we supply CNC-cut carbon fiber plates, forged carbon shells, or finished carbon fiber cover panels only. Your team then completes final assembly with your own metal hardware, leather parts, or packaging. This works well for customers who have their own assembly line or hardware supply chain.
Ja. Den typiske tilgang er en ydre skal i kulfiber med læderindvendige paneler, der er limet eller syet på plads. De vigtigste produktionsovervejelser er klæbemiddelkompatibilitet med begge materialer, overfladeforberedelse inden limning og kantbearbejdning ved kulfiber-lædergrænsen.
Ja. Et foto af et referenceprodukt med dine ønskede dimensioner er nok til at starte. Vi vil gennemgå muligheden og vende tilbage med spørgsmål, hvis vi har brug for flere detaljer, før vi forbereder tilbuddet.
Hvis du udvikler en kulfiber pung eller kortholder til dit brand — uanset om det er en ny produktlinje, et private label program, et firmagaveprodukt eller en OEM-komponent til detailhandel — send os din briefing.
Inkluder din pungetype, ønskede dimensioner, overfladefinish, logo krav, RFID-specifikation hvis relevant, og estimeret ordreantal. Vi vil gennemgå dit projekt og svare med indledende feedback eller et foreløbigt tilbud baseret på de designinformationer, der er givet.
Ud over punge og livsstilsaccessories fremstiller vores fabrik også Motorcykeldele i kulfiber til OEM- og eftermarkedskunder verden over. Den samme procesdisciplin — materialespecifikation, værktøj, overfladebehandling og kvalitetskontrol — gælder for hver produktkategori, vi fremstiller.
Vi arbejder med brands, distributører, gavevirksomheder, produktudviklere og detailkøbere, der ønsker at købe direkte fra fabrikken. Hvis du vil forstå hele omfanget af, hvad vores anlæg producerer, besøg chinacarbonfibers.com hovedsiden for en komplet oversigt over vores fremstillingskapaciteter.
Hvis du har arbejdet gennem handelsvirksomheder og ønsker direkte adgang til fabrikken, kontakt os med dine specifikationer, så tager vi os af det.
Vores fabrik anvender en avanceret carbon fiber hot press proces med en P20 stålform, hvilket sikrer høj effektivitet, præcision, holdbarhed og omkostningseffektivitet for kvalitetsproduktion.
Vores fabrik kører 100+ hot pressure autoklaver, der bruger aluminiumforme og vakuuminduktion til præcist at forme carbon fiber. Høj varme og tryk forbedrer styrke, stabilitet og fejlfri kvalitet.
Vores Carbon Fiber Research Center driver innovation inden for ny energi, intelligens og letvægtsdesign ved at bruge avancerede kompositter og Krauss Maffei Fiber Form til at skabe banebrydende, kundefokuserede løsninger.
Her er svarene på de ofte stillede spørgsmål fra den erfarne carbon fiber produkter fabrik
Vi producerer et bredt udvalg af carbonfiberkomponenter, herunder bildele, motorcykeldelse, luftfartsdele, marine tilbehør, sportsudstyr og industrielle anvendelser.
Vi bruger primært høj kvalitet prepreg carbonfiber og store towe carbonfiberforstærkede højtydende kompositter for at sikre styrke, holdbarhed og letvægtsegenskaber.
Ja, vores produkter er belagt med UV-beskyttende coating for at sikre langvarig holdbarhed og bevare deres polerede udseende.
Ja, vores faciliteter og udstyr er i stand til at producere store carbonfiberkomponenter med præcision og kvalitet.
Hvad er fordelene ved at bruge carbonfiberprodukter?
Carbonfiber tilbyder enestående styrke-til-vægt-forhold, korrosionsbestandighed, stivhed, termisk stabilitet og et slankt, moderne udseende.
Vi betjener bil-, motorcykel-, luftfarts-, marine-, medicinske-, sports- og industrielle sektorer med fokus på letvægts- og højtydende carbon fiber komponenter.
Ja, vi leverer tilpassede kulfiberløsninger, der er skræddersyet til dine specifikationer, herunder unikke designs, størrelser og mønstre.
Vi anvender avancerede teknologier såsom autoklavforming, hotpressing og vakuumpakning, hvilket sikrer præcision, stabilitet og kvalitet i hvert produkt.
Vi bruger aluminium- og P20 stålforme, designet til holdbarhed og høj nøjagtighed, til at skabe komplekse og præcise carbon fiber komponenter.
Vores produkter gennemgår strenge kvalitetskontrolcheck, herunder dimensionel nøjagtighed, materialets integritet og ydeevnetest for at opfylde industriens standarder.
