Land Rover & Range Rover Carbon Fiber Parts
OEM/ODM Land Rover and Range Rover carbon fiber parts manufacturer in China. We produce body kits, front lips, rear diffusers, hoods, spoilers, mirror covers and interior trims for Range Rover Sport, SVR, Defender, Velar and Evoque.
Land Rover & Range Rover Carbon Fiber Parts We Manufacture
| Model | Carbon Fiber Parts Available |
|---|---|
| Range Rover Sport L461 (2022+) | Front lip, rear diffuser, side skirts, hood vents, bonnet trim, spoiler, grille surround, mirror covers |
| Range Rover Sport L494 | Body kit, front splitter, rear diffuser, side skirts, door handle trim, interior carbon panels |
| Range Rover SVR | Full body kit, bonnet vent trim, rear diffuser, side skirts, trunk spoiler, interior trims |
| Range Rover Vogue / L460 | Exterior trim strips, grille, mirror covers, rear spoiler, interior carbon door panels |
| Defender 90 / 110 | Hood trim, fender vents, roof rack trim, mirror covers, interior dash panels, custom exterior overlays |
| Range Rover Velar | Front splitter, rear diffuser, side door trim, mirror covers, custom carbon overlays |
| Range Rover Evoque | Front lip, rear diffuser, mirror covers, side skirts, spoiler, interior trims |
If your model or configuration is not listed, contact us with your VIN or specification. We can develop custom parts from 3D files, original samples or factory drawings — see our custom carbon fiber manufacturing service for more detail.
Carbon Fiber Parts by Range Rover and Land Rover Model
Range Rover Sport (L461 / L494) Carbon Fiber Parts
The Range Rover Sport is one of our most requested platforms. We produce full exterior upgrade kits including front splitters, rear diffusers, side skirts and bonnet vent trims for both the current L461 (2022+) and the previous-generation L494. Parts are available as individual components or as a complete body kit.
Popular components for Range Rover Sport:
- Front bumper lip / front splitter
- Rear diffuser (standard and twin-exit exhaust cutout versions)
- Side skirt extensions
- Bonnet / hood vent trim
- Roof spoiler and trunk lid spoiler
- Mirror covers (gloss, satin or matte finish)
- Interior door panel inserts, dashboard trim strips, steering wheel trim ring
Range Rover SVR Carbon Fiber Parts
We manufacture carbon fiber upgrade parts specifically for the Range Rover Sport SVR, including aggressive body kit components that match the factory SVR styling language. All parts are produced in 2×2 twill weave or forged carbon patterns depending on the application and budget.
Range Rover Vogue / Autobiography (L460) Carbon Fiber Parts
For the full-size Range Rover, we supply exterior carbon fiber trim sets, grille surrounds and interior carbon panel upgrades. These are built to the same tolerances expected from a flagship vehicle and are available in gloss, satin or matte clear coat.
Land Rover Defender (90 / 110) Carbon Fiber Parts
The Defender platform has seen strong demand for carbon fiber accessories since the L663 relaunch. We supply hood trim panels, fender vent surrounds, mirror covers, roof panel accents and interior trim panels. Custom bonnet vent trims, fender surrounds and hood overlays for Defender 90 and 110 can be developed from 3D files, original samples or detailed reference data.
Range Rover Velar and Evoque Carbon Fiber Parts
For the Velar and Evoque, we produce front splitters, rear diffusers, side door trim overlays and mirror covers. These are typically supplied as bolt-on components compatible with OEM mounting points.
Popular Carbon Fiber Components for Range Rover Sport, SVR and Defender
Exterior Aerodynamic Components Front splitter / front lip, rear diffuser, side skirts, wide arch kit, bonnet vents, trunk spoiler, roof spoiler, front canards
Body Trim and Overlays Mirror covers, door handle covers, window pillar trim, grille surround, lower bumper trim inserts, side vent covers
Interior Carbon Fiber Parts Dashboard trim strips, center console panel, gear selector surround, steering wheel trim ring, door panel inserts, cup holder trim, air vent bezels
Custom and One-Off Parts Prototype parts from customer-supplied 3D files, reverse-engineered from OEM samples, or developed from scratch based on drawings. For complex or fully bespoke projects, see our custom carbon fiber manufacturing service.
Dry Carbon, Wet Carbon, Forged Carbon and 3K Twill Options
Depending on the part structure, budget and application, we manufacture Land Rover and Range Rover carbon fiber parts using prepreg autoclave curing, vacuum bagging, wet layup or compression moulding.
Dry Carbon Fiber (Prepreg / Autoclave) Prepreg carbon cloth is laid in a mould and cured under heat and pressure in an autoclave. The result is a lightweight and rigid part with lower void content and better laminate consistency compared with traditional wet layup. Recommended for structural or aerodynamic components such as hoods, splitters and diffusers where weight matters. Surface finish is 2×2 or plain weave, available in gloss or matte UV-protected clear coat.
Wet Carbon Fiber (Hand Layup) Carbon cloth is laid by hand with epoxy resin and vacuum bagged. Parts are slightly heavier than prepreg but allow complex geometry at a lower tooling cost. Suitable for interior trims, mirror covers, spoilers and overlays. Available in 2×2 twill or 3K plain weave.
Forged Carbon Fiber Short carbon fiber strands compressed in a mould produce a distinctive marbled, random-direction pattern. Forged carbon is exceptionally stiff for its thickness and is well suited to interior trim and small aerodynamic components. Each part has a unique visual pattern.
3K Twill Weave The classic diagonal basket-weave appearance. Available in 2×2 or 3K density, and is the standard finish for most exterior and interior trim parts. Clear-coated in gloss, satin or matte. All finish options are available in standard black carbon, tinted clear coat or painted finishes on request.
Custom OEM/ODM Manufacturing for Land Rover Carbon Fiber Parts
We operate as a direct OEM/ODM factory for automotive aftermarket brands, tuning workshops and wholesale distributors. Core composite production is carried out in-house at our facility in China, with direct factory control over tooling, layup, curing, trimming and quality inspection — no trading company markup.
Tooling and Mould Development We develop new moulds from customer-supplied 3D files (STEP, IGES, STL), physical samples or factory drawings. If you only have a physical part, we can reverse-engineer it using 3D scanning at our facility. Contact us with your project files for a tooling estimate.
Sample and Prototype Production Before mass production, we produce pre-production samples for customer approval and revise moulds if fit or finish adjustments are required.
Batch and Volume Production We supply Land Rover carbon fiber parts in small batches through to high-volume production runs for wholesale distributors. Minimum order quantities vary by part type.
Private Label and White Label Parts can be supplied without branding or with your own brand markings. We do not disclose end customers or supply chain information.
Beyond Land Rover and Range Rover, our factory also produces carbon fiber parts for other vehicle platforms — see the full carbon fiber car parts category for our complete range. We also manufacture carbon fiber motorcycle parts for major brands including Ducati, BMW and Yamaha.
Quality Control and Fitment Checking
Before shipment, each Land Rover or Range Rover carbon fiber part is checked for surface finish, edge trimming, mounting points, body gaps and general fitment against the approved sample or reference data. For new tooling projects, sample approval is recommended before batch production.
For exterior body kit components, professional installation is recommended to ensure correct alignment with bumpers, panels and OEM mounting positions.
How to Start a Custom Land Rover Carbon Fiber Project
Step 1 — Send your requirements Contact us via the enquiry form or WhatsApp with your vehicle model, year, and the parts you need. If you have 3D files or photos of a reference part, include those.
Step 2 — Receive a quotation We confirm which parts we have existing tooling for and quote tooling development costs for custom or new parts, along with unit price and lead time.
Step 3 — Approve the sample We produce a pre-production sample and ship it for your approval. You can request adjustments before signing off on production.
Step 4 — Production and shipment After sample approval, we proceed to batch production and arrange sea freight, air freight or express courier depending on your timeline and volume.
For fully bespoke or high-complexity projects, our custom carbon fiber manufacturing service covers the full process in more detail.
Why Choose Our Factory for Land Rover Carbon Fiber Parts
Direct manufacturer, not a trader We produce every part in our own factory. You deal directly with the production team, not a trading company adding a margin. See more about our manufacturing background at chinacarbonfibers.com.
Established since 2008 Our factory has been producing carbon fiber automotive parts since 2008, across multiple Land Rover and Range Rover model generations.
Full material and finish options We offer dry carbon, wet carbon, forged carbon and 3K twill across all our Land Rover parts. Most competitors offer only one or two material options.
OEM-style fitment and consistent finish We check mounting points, edge trimming, body gaps and surface finish against approved samples or reference data before shipment. For new tooling projects, sample approval is recommended before batch production.
Wholesale and trade pricing We supply to aftermarket brands, tuning workshops, detailing studios and independent distributors. Volume pricing is available — contact us to discuss trade account terms.
FAQ About Land Rover Carbon Fiber Parts
Can you manufacture custom Range Rover carbon fiber parts from 3D files?
Yes. We accept STEP, IGES and STL files. If you have existing 3D data for a part, we can begin tooling development immediately. If you only have a physical sample, we can reverse-engineer it using 3D scanning at our facility.
Do you make dry carbon or wet carbon Land Rover parts?
We manufacture in both processes. Dry carbon (prepreg / autoclave) is available for structural and aerodynamic parts such as hoods, splitters and diffusers. Wet carbon (hand layup / vacuum bag) is available for trims, overlays and smaller components. We will recommend the right process for your application and budget.
Can you make carbon fiber parts for Range Rover Sport L461 or L494?
Yes. We have tooling for multiple Range Rover Sport body kit components across both generations. Contact us with the specific parts you need and we will confirm availability and lead times.
What surface finishes are available?
Gloss, satin and matte clear coat are available as standard. Tinted clear coat, painted finishes and custom lacquer effects are available on request. All clear coats include UV protection.
Do you need original OEM samples or 3D drawings to start a new part?
Either works. If you can supply a 3D file (STEP or IGES), we can go directly to tooling. If you only have a physical part, we can 3D scan it at our factory. If you have neither, contact us — for some applications we can develop parts from detailed photographs and measurements.
Can you supply wholesale Land Rover carbon fiber body kits?
Yes. We supply wholesale to aftermarket distributors globally. Minimum order quantities depend on the part. For complete body kits we can discuss exclusivity arrangements with qualifying distributors.
For more vehicle platforms, see our carbon fiber car parts category and custom carbon fiber manufacturing service.
All Land Rover and Range Rover model names are used for parts compatibility reference only. Chinacarbonfibers is an independent aftermarket manufacturer and is not affiliated with Jaguar Land Rover Limited.