Custom Tesla Carbon Fiber Parts Manufacturer
OEM/ODM Tesla carbon fiber parts for Model 3, Model Y, Model S, Model X, Cybertruck and Roadster. We manufacture custom body kits, spoilers, diffusers, hoods, exterior panels and interior trims in dry carbon, wet carbon, forged carbon and 3K twill.
Tesla Carbon Fiber Parts We Manufacture
As a China carbon fiber parts factory, we support aftermarket brands, tuning shops, body kit suppliers and custom vehicle projects with tooling, prototyping and batch production.
We manufacture exterior and interior carbon fiber parts for Tesla styling, lightweight replacement, aerodynamic upgrades and OEM/ODM development. Common parts include front lips, rear diffusers, spoilers, side skirts, hoods, fenders, mirror covers, dashboard trims, seat backs and custom body panels.
Development can start from STEP/STP files, original samples, engineering drawings, 3D scan data or reference photos.
Exterior parts:
- Front lips and splitters
- Rear diffusers
- Spoilers and wings
- Side skirts
- Carbon fiber hoods
- Fenders and exterior body panels
- Mirror covers
- Custom full body kits
Interior trims:
- Dashboard trim panels
- Center console covers
- Door card inserts
- Steering wheel trim
- Seat back covers
- Pillar trim and overhead console
Custom Tesla Body Kits vs Individual Carbon Fiber Parts
We can manufacture complete Tesla carbon fiber body kits or individual replacement parts depending on the project requirement. A full body kit may include a front lip, side skirts, rear diffuser, spoiler and exterior trim pieces designed with a consistent carbon fiber finish. For customers sourcing OEM/ODM Tesla carbon fiber body panels or private-label body kits, we can develop tooling and manage batch manufacturing from prototype through to repeat orders.
For smaller projects, customers can also develop single parts such as mirror covers, dashboard trims, seat backs, hoods or custom exterior panels. For batch production, we recommend confirming the model year, fitment reference and packaging requirement before tooling starts.
Tesla Models We Support
| Tesla Model | Common Carbon Fiber Parts |
|---|---|
| Model 3 / Highland | Front lips, spoilers, diffusers, hoods, interior trims, mirror covers |
| Model Y / Juniper | Spoilers, mirror covers, full body kits, interior trims, diffusers |
| Model S | Exterior trim panels, spoilers, dashboard parts, door inserts |
| Model X | Mirror covers, interior trims, custom exterior panels |
| Cybertruck | Custom forged carbon trims, exterior accessories, interior panels |
| Roadster | Custom Tesla Roadster carbon fiber body panels and full aero body kits |
Our factory can evaluate and develop carbon fiber parts for different Tesla models when suitable reference data is available. If your project requires a part not listed above, send us your reference photo, 3D file or sample for a feasibility review. Tesla carbon fiber projects are also part of our broader carbon fiber car parts range, which covers other makes and models.
Fitment and Model Year Confirmation
Tesla parts may vary between different model years, facelift versions and regional specifications. For Model 3 Highland, Model Y Juniper, Cybertruck and other newer Tesla models, we recommend confirming the exact vehicle year, version and reference photos before quotation.
For best fitment accuracy, original samples, 3D scan data or STEP/STP files are preferred before mold development.
Manufacturing Options for Tesla Carbon Fiber Parts
| Process | Description | Best For |
|---|---|---|
| Prepreg autoclave (dry carbon) | Carbon fiber prepreg cured in autoclave under pressure and controlled temperature | Lightweight race parts, premium appearance, high stiffness |
| Vacuum infusion (wet carbon) | Resin infused under vacuum into dry carbon fabric | Cost-effective aftermarket body panels and large exterior parts |
| Forged carbon molding | Chopped carbon fiber compressed in heated molds | Decorative trims, complex interior shapes, special styling parts |
| Compression molding | Carbon fabric or SMC compound in matched metal dies | High-volume production, stable dimensions, consistent surface quality |
All processes are available in 3K twill, UD, 2×2 twill or custom weave patterns. Surface finish options include gloss clear coat, matte clear coat and UV-resistant topcoat.
Material Specifications
| Specification | Details |
|---|---|
| Carbon fiber type | 3K twill, UD carbon, 2×2 twill, carbon/Kevlar hybrid, forged carbon |
| Resin system | Epoxy prepreg, epoxy infusion resin, compression molding compound |
| Surface finish | Gloss clear coat, matte clear coat, UV-resistant coating, painted finish |
| Thickness | Custom per project — commonly around 1.2 mm to 4 mm depending on part structure and process |
| Production type | OEM/ODM, private label, small batch prototype or mass production |
| Development input | STEP/STP 3D files, original part samples, engineering drawings, reference photos |
OEM/ODM Development Process
1. Submit your project requirements Send us STEP/STP files, original part samples, drawings or reference photos. Include required quantity, surface finish, fitment reference and any structural requirements.
2. Feasibility review and quotation We review the structure, fitment tolerances and production method. You receive a detailed quotation covering tooling cost, unit price and lead time.
3. Mold design and tooling Our in-house mold team designs and machines the tooling. Mold material is selected based on production volume and part geometry.
4. First sample production We produce the first sample using the approved process and surface finish. Photos and measurements are shared for your review before shipping.
5. Test fitting and adjustment If physical test fitting is required, we ship the sample for your verification. Any fitment or surface adjustments are made at this stage.
6. Batch production and QC inspection After sample approval, we proceed to batch production. Each part goes through dimensional inspection, surface check and packaging QC before shipment.
Why Work With Our Factory
Factory manufacturing, not trading company We manage tooling, carbon fiber lay-up, autoclave curing and finishing through our production team, so customers can communicate directly with the factory during development and production.
Full process coverage We support prepreg autoclave dry carbon, vacuum infusion wet carbon, forged carbon molding and compression molding, allowing customers to choose the right process for their budget and performance target.
Custom development capability We can develop new parts from 3D files, physical samples or reference photos. Our engineering team reviews fitment, wall thickness and structural requirements before tooling starts. For fully custom shapes not based on existing vehicle parts, see our custom carbon fiber manufacturing services.
Export experience We supply to aftermarket brands, tuning workshops and body kit distributors in Europe, North America, Southeast Asia and the Middle East. Parts are packed to shipping standards with adequate foam protection and corner reinforcement.
Quality control Every batch undergoes visual inspection, dimensional check and surface quality review. Critical structural parts can include fiber weight and cure verification on request. For more details on our production background and export experience, visit our factory overview.
FAQ About Custom Tesla Carbon Fiber Parts
Can you manufacture OEM Tesla carbon fiber body panels?
Yes. We manufacture OEM/ODM Tesla carbon fiber body panels to your specification, based on 3D files, original part samples, engineering drawings or reference photos. For OEM/ODM body panel projects, customers typically provide either a physical sample or STEP/STP data to confirm fitment before tooling starts. We can also develop tooling from reverse-engineering your existing OEM part.
Do you make Tesla Model 3 and Model Y carbon fiber body kits?
Yes. We manufacture front lips, rear diffusers, spoilers, side skirts, hoods, mirror covers and interior trims for Tesla Model 3 and Model Y projects in both small batch and mass production volumes.
What is the difference between dry carbon and wet carbon for Tesla parts?
Dry carbon is made with prepreg carbon fiber and autoclave curing under controlled pressure and temperature. It offers better fiber-to-resin ratio, weight control, stiffness and surface quality. Wet carbon using vacuum infusion is more cost-effective for larger aftermarket exterior parts where extreme weight reduction is not the primary requirement.
Can you make forged carbon fiber parts for Tesla?
Yes. Forged carbon is suited for mirror covers, interior trim panels, decorative inserts and special styling parts. The process allows more complex 3D geometry than traditional flat-lay carbon and produces a distinctive irregular fiber pattern.
What files do you need to start a custom Tesla carbon fiber project?
For an accurate quotation, please send STEP/STP 3D files, original part samples, engineering drawings or reference photos, along with required quantity, surface finish preference and fitment references. The more detail you provide at this stage, the faster we can confirm tooling design and pricing.
Do you support private label and small batch production?
Yes. We support OEM/ODM projects, private label parts and small batch prototype development. Minimum order quantities depend on part size and tooling investment. Contact us to discuss your project requirements.
What Tesla models do you currently have tooling for?
We have tooling for some common Model 3 and Model Y exterior and interior parts. For other Tesla models or facelift versions such as Model 3 Highland and Model Y Juniper, new tooling may be required. Send us your part requirement and we will confirm tooling availability and lead time.
Get a Quote for Your Tesla Carbon Fiber Project
To start a custom Tesla carbon fiber project, send us:
- Part name and Tesla model/year
- STEP/STP 3D files, original samples or reference photos
- Required quantity (prototype or mass production)
- Surface finish requirement (gloss, matte, painted)
- Target price range or process preference (dry carbon / wet carbon / forged carbon)
We will review your requirements and respond with a detailed quotation including tooling cost, unit price and production lead time. Contact us through ChinaCarbonFibers.com with your project details to get started.
Other Carbon Fiber Manufacturing Services
Beyond Tesla carbon fiber parts, we also manufacture carbon fiber components for other vehicles and custom applications:
- Carbon fiber car parts — OEM/ODM exterior and interior carbon fiber parts for different vehicle brands
- Carbon fiber motorcycle parts — carbon fiber fairings, panels and trims for motorcycles and race bikes
- Custom carbon fiber manufacturing — custom carbon fiber parts developed from 3D files, samples or drawings
For an overview of our factory, production capabilities and export experience, visit our company page.