Carbon Fiber Composite Material Hot Pressing Molding Process
Our factory employs an advanced carbon fiber hot press process with a P20 steel mold, ensuring high efficiency, precision, durability, and cost-effectiveness for quality production.
Hayabusa Carbon Fiber Front Fender For Suzuki GSXR1300 GSX1300R GSX-R1300 2008-2020
Table of Contents
Hayabusa Carbon Fiber Front Fender
What Is This Part?
This is a front fender made of carbon fiber for your Suzuki Hayabusa bike. It goes on the front of your bike to keep dirt and water from splashing up. Our parts make your bike look cool and go fast!
Why You Will Love This Front Fender
- It is very light
- It looks very cool
- It fits your bike just right
- It lasts a long time
- It helps your bike go faster
What It Is Made Of
Our front fender is made of 100% carbon fiber. This is not the cheap kind of carbon fiber. We use dry carbon that we call prepreg carbon. This is the best kind! We make it with a UV coat on top. This means the sun will not make it turn yellow or fade. It will stay looking new for a long time! You can pick from two looks:
- Shiny (gloss)
- Not shiny (matte) Both look very cool! The carbon has a cool pattern that we call twill or V weave. This makes your bike stand out. Is carbon fiber lighter than plastic? Yes! That’s why your bike will feel more fast and fun with our parts!
What Bikes Does It Fit?
Our carbon fiber front fender fits on these Suzuki Hayabusa bikes: | Bike Type | Years | |————–|———–| | Gen 1 Hayabusa | 1999-2007 | | Gen 2 Hayabusa | 2008-2020 | | Gen 3 Hayabusa | 2021-2025 | It can also fit on these bikes with some small extra parts:
- Kawasaki ZX14/ZX-14R
- Suzuki GSXR1000 (you need brackets)
How to Put It on Your Bike
Putting this front fender on your bike is very easy! For Gen 2 and Gen 3 Hayabusa:
- Take off your old front fender
- Put our carbon fiber fender in the same spot
- Use the front two spots where the old fender was
- Tighten the screws
- Go ride and look cool! For Gen 1 Hayabusa or GSXR1000:
- You need to get the small extra bracket parts first
- The brackets cost a bit more ($70)
- Then you can put it on just like above We give you all the little screws and parts you need to put it on!
Why Carbon Fiber Is Better
Our carbon fiber front fender is much better than the one that came with your bike. Here’s why:
It Makes Your Bike Lighter
The front fender that came with your bike is made of plastic. Our carbon fiber part is much lighter. When your bike is lighter, it can:
- Go faster
- Turn better
- Stop quicker
It Helps Your Bike Cut Through Air
Our front fender is shaped to help your bike cut through the air. This is called aerodynamics. Better aerodynamics means:
- Less drag
- More speed
- Better handling This is why race bikes use our parts!
It Looks Amazing
Let’s be honest – carbon fiber looks cool! Your bike will stand out from all the other bikes. People will look at your bike and say “Wow!” The carbon fiber pattern shows through the clear coat. It looks like art on your bike. Is carbon fiber stronger than titanium? In many ways, yes! That’s why we use it for high-performance motorcycle parts!
When to Use Our Carbon Fiber Front Fender
Our carbon fiber front fender is perfect for many ways you ride:
Going to the Track
If you take your Hayabusa to the race track, our front fender will help you go faster! It cuts through the air better and makes your bike lighter. This means:
- Faster lap times
- Better handling
- More wins!
Making Your Bike Look Cool
If you want your bike to look the best, our carbon fiber front fender will help! The carbon fiber pattern looks very cool. It shows people you have the best parts on your bike.
Fixing Up an Old Bike
If you have an old Gen 1 or Gen 2 Hayabusa, our carbon fiber front fender can make it look new and cool! With our brackets, it fits old bikes too.
What Other Riders Say
Riders who buy our front fenders say:
“It fit my bike perfect! No cutting or changing needed!” “My bike feels lighter and faster now!” “Everyone asks me about my carbon fiber parts!” “It was easy to put on. Took just 10 minutes!”
How We Make Our Carbon Fiber
We don’t make carbon fiber parts like other companies. We use the best way to make carbon fiber:
- We start with dry carbon sheets
- We put the carbon in special molds
- We use a vacuum to make it the right shape
- We cook it in a big oven called an autoclave
- We put 3 coats of clear on top
- We polish it by hand until it looks perfect This makes our carbon fiber parts stronger, lighter, and better looking than other companies! Our custom carbon fiber process means we can make any part perfect for your bike!
Carbon Fiber Brands We Make
We make carbon fiber front fenders like these top brands:
- AGM style with special UV testing
- DME Racing style for the best aerodynamics
- RPM Carbon style that looks like a hugger
- STR!KER style with special dry carbon But our prices are better! You get the same quality for less money.
More Ways to Make Your Hayabusa Better
The front fender is just the start! We make many carbon fiber parts for your Hayabusa:
- Rear fender
- Side panels
- Gas tank cover
- Tail section
- Chain guard Our carbon fiber car section also has cool parts if you have a sports car too!
Why Buy From Us?
We are a real carbon fiber factory. We don’t just sell parts – we make them! This means:
- Better quality – we check every part
- Better fit – we use the right molds
- Better price – no middle man
- Custom options – we can make changes for you
- Fast shipping – we send right from our factory
Our Carbon Fiber Quality
Not all carbon fiber is the same. Cheap carbon fiber can:
- Break easy
- Look bad
- Not fit right
- Turn yellow in the sun Our carbon fiber is the best quality:
- Strong – won’t break
- UV protected – won’t turn yellow
- Perfect fit – no cutting needed
- Beautiful finish – looks amazing
How to Order Your Carbon Fiber Front Fender
Getting your new carbon fiber front fender is easy:
- Pick your bike type (Gen 1, Gen 2, or Gen 3 Hayabusa)
- Choose shiny or not shiny finish
- Add to cart
- Check out
- We ship to you fast! Questions? Just ask us! We love to talk about carbon fiber.
Carbon Fiber Care Tips
To keep your carbon fiber front fender looking great:
- Wash with soap and water
- Don’t use rough sponges
- Use car wax to keep it shiny
- Keep it out of the sun when not riding
Our Promise to You
We stand behind all our carbon fiber parts. If it doesn’t fit right or has a problem, we will fix it! Your bike is special. It should have the best parts. Our carbon fiber front fender will make your Hayabusa look amazing and go faster too!
Visit our website to see all our amazing carbon fiber products for motorcycles, cars, and custom projects!
Order today and make your Hayabusa stand out from all the rest! Call us: +86 136 2619 1009 Email: [email protected]
Carbon Fiber Autoclave
Our factory runs 100+ hot pressure autoclaves, using aluminum molds and vacuum induction to shape carbon fiber with precision. High heat and pressure enhance strength, stability, and flawless quality.
Carbon Fiber Engineering Technology Research Center
Our Carbon Fiber Research Center drives innovation in new energy, intelligence, and lightweight design, using advanced composites and Krauss Maffei Fiber Form to create cutting-edge, customer-focused solutions.
Frequently Asked Question
Here are the answers to the frequently asked questions from the experienced carbon fiber products factory
We produce a wide range of carbon fiber components, including automotive parts, motorcycle parts, aerospace components, marine accessories, sports equipment, and industrial applications.
We primarily use high-quality prepreg carbon fiber and large-tow carbon fiber reinforced high-performance composites to ensure strength, durability, and lightweight characteristics.
Yes, our products are coated with UV-protective finishes to ensure long-lasting durability and maintain their polished appearance.
Yes, our facilities and equipment are capable of producing large-size carbon fiber components while maintaining precision and quality.
What are the benefits of using carbon fiber products?
Carbon fiber offers exceptional strength-to-weight ratio, corrosion resistance, stiffness, thermal stability, and a sleek, modern appearance.
We cater to automotive, motorcycle, aerospace, marine, medical, sports, and industrial sectors with a focus on lightweight and high-performance carbon fiber components.
Yes, we provide custom carbon fiber solutions tailored to your specifications, including unique designs, sizes, and patterns.
We utilize advanced technologies such as autoclave molding, hot pressing, and vacuum bagging, ensuring precision, stability, and quality in every product. wonders with the Hello Elementor Theme, we’re trying to make sure that it works great with all the major themes as well.
We use aluminum and P20 steel molds, designed for durability and high accuracy, to create complex and precise carbon fiber components.
Our products undergo rigorous quality control checks, including dimensional accuracy, material integrity, and performance testing, to meet industry standards.
